Laser triangulation sensors (series LD4.2)

 

Laser triangulation sensors, series LD4Laser triangulation sensors, series LD4.2:

A special series of sensors with an increased value of the start of measuring range, for situations when the sensor, for certain reasons cannot be installed close to the measured object.

 

The sensors are designed for use in automation systems and contactless measurement of different geometric parameters: thickness, straightness, inner and outer diameters, scanning the profile of objects with complex forms, determining the position of objects. On the basis of the sensors, a system of automatic control of different processes can be built. In addition, the sensor has the ability to connect the positioning signals from the machines for the realization of 3D scanning systems.

 

  

SENSOR SPECIFICATIONS:
 
 
  • Measurement range from 20мм to 2000mm;
  • Measurement accuracy up to ±10μm;
  • Measuring rate up to 25kHz;
  • Digital interfaces:
    • Ethernet 100Mb/s
    • USB 10Mb (Virtual COM port)
    • RS485 (up to 10,5Mb/s)
  • Communication protocols: ModBus RTU, ModBus TCP/IP;
  • Programmable analogue output:
    • 0..5ma   (load ≤ 2800 Ohm)
    • 0..10ma (load ≤ 1400 Ohm)
    • 0..20ma (load ≤ 700 Ohm)
    • 4..20ma (load ≤ 700 Ohm)
  • 2 programmable electrically isolated discrete outputs;
  • 4 programmable electrically isolated discrete inputs;
  • Possibility to receive positioning signals up to 2 axis: X,Y;
  • Possibility to operate as 3D scanner when installed on a step motor or quad encoder machine;
  • Internal buffer for storage up to 40000 measurements;
  • Data buffering modes:
    • By time
    • By synchronization signal
    • Relative buffering by step motor signals STEP/DIR or encoder signals A/B
    • Absolute buffering (recording position up to 2 axis) by step motor signals STEP/DIR and/or encoder signals A/B
  • Protection class IP60 or IP67;
  • Main power supply 7V..30V DC;
  • USB power supply 3,5V..5,5V DC;
  • Power consumption 2W;
 
 
 
 
 
 
 
 

EXAMPLES OF USE OF THE LASER SENSOR:

  
Straightness measurement system Straightness measurement system  
 
 
 
 
 

Straightness measurement system

  
   

Thickness measurement system for sheet articles

Thickness measurement system

for sheet articles

Internal surface inspection, diameter measuring

Internal surface inspection, 

diameter measuring

  
 
 
 
 
 
 
 
 
   

Profile measuring

Profile measuring

Laser sensor controls desplacement of a milling cutter support

The laser sensor controls the movement of the mill supporting lunette

  
 

OVERALL AND MOUNTING DIMENSIONS:
   
 

Габаритные и установочные размеры датчика LD4.2

B1 - Enclosure IP67; B2 - Enclosure IP60;

 
 
 
 
   

Measurement of runout, vibration displacement, and frequency

 

Measurement of runout, vibration displacement, and frequency

 

Measurement of runout, vibration displacement, and frequency

  
 
 
 
 
 
 
 
 
   

 

Laser 3D scanner on base of CNC machineLaser 3D scanner on base of CNC machine

Laser 3D scanner based on a CNC machine

  
 
 
 
   
 

 

    
 

 

  

DOWNLOAD:

 

 

 

                                        

   User manual.pdf
  Руководство по эксплуатации ЛД1 Instructions for creating a 3D laser scanner.pdf
      Software (x32)
      Software (x64)